SWD9515 dasa rufin tushen huda juriya na musamman polyurea mai hana ruwa mai kariya
Samfurin fasali da fa'idodi
* Mai narkewa kyauta, ingantaccen abun ciki 100%, lafiyayye, abokantaka da muhalli kuma mara wari.
* Magani cikin sauri, ana iya fesa shi yana kafawa akan kowane lanƙwasa, gangare da saman saman tsaye, babu sagging.
* Shafi mai yawa, mara kyau, tare da sassauci mai kyau.
* Ƙarfin mannewa mai ƙarfi, haɗawa da sauri da kyau akan ƙarfe, kankare, itace, filayen gilashi da sauran abubuwan da aka gyara.
* Kyakkyawan juriya mai tasiri, juriya abrasion
* Kyakkyawan juriya da juriya da sinadarai ga acid, alkali, gishiri da sauransu.
* Kyakkyawan juriyar huda ga tushen shuka, juriyar shigar da ruwa
* Kyakkyawan aiki mai ɗaukar girgiza
* Kyakkyawan juriya ga bambancin zafin jiki
*Maganin sauri, shafin aikace-aikacen komawa ga sabis da sauri
* Kyakkyawan karko don rage farashin kulawa na rayuwar sabis
* Tsawaita rayuwar sabis na tsarin fesa
Aikace-aikacen samfur
Tushen juriya mai hana ruwa kariya na rufin lambun, filin birni da sauran rufin da aka dasa
Bayanin samfur
| Abu | A | B
|
| Bayyanar | Kodadden ruwa rawaya | Daidaitaccen launi |
| Takamaiman nauyi (g/m³) | 1.13 | 1.04 |
| Dangantaka (cps) @ 25 ℃ | 810 | 670 |
| M abun ciki (%) | 100 | 100 |
| Mixing rabo (girman rabo) | 0 | 0 |
| Lokacin gel (na biyu) @ 25 ℃ | 1 | 1 |
| Lokacin bushewa (na biyu) | 3-5 | |
| Rubutun Ka'idar (dft) | 1.02kg/㎡ kauri na fim: 1mm | |
Jiki Properties na kayayyakin
| Abubuwa | Gwaji misali | Sakamako |
| Hardness (Share A) | ASTM D-2240 | 89 |
| Yawan haɓakawa (%) | ASTM D-412 | 450 |
| Ƙarfin ƙarfi (Mpa) | ASTM D-412 | 17 |
| Ƙarfin hawaye (N/km) | ASTM D-624 | 65 |
| Rashin Haihuwa (0.3Mpa/30min) | HG/T 3831-2006 | wanda ba zai iya jurewa ba |
| Yin juriya (750g/500r)/mg | HG/T 3831-2006 | 4.2 |
| Ƙarfin mannewa (Mpa) tushe mai tushe | HG/T 3831-2006 | 3.4 |
| Ƙarfin mannewa (Mpa) gindin karfe | HG/T 3831-2006 | 11 |
| Yawan yawa (g/cm³) | GB/T 6750-2007 | 1.02 |
| Rarraba Cathodic [1.5v, (65 ± 5) ℃, 48h] | HG/T 3831-2006 | ≤15mm |
Bayanin aikace-aikace
Haɓaka sashin B riga kafin aikace-aikacen, haɗa pigment ɗin da aka ajiye sosai, ko ingancin samfurin zai shafi.
fesa polyurea a cikin lokacin da ya dace idan farfajiyar ƙasa ta fara farawa.Don hanyar aikace-aikacen da tazarar lokaci na SWD polyurea speical primer da fatan za a koma zuwa sauran ƙasidar kamfanonin SWD.
Koyaushe yi amfani da SWD fesa polyurea akan ƙaramin yanki kafin babban aikace-aikacen don bincika mahaɗin mahaɗin, launi da tasirin fesa daidai ne.Don cikakkun bayanai game da aikace-aikacen da fatan za a duba sabuwar takardar koyarwa taumarnin aikace-aikace na SWD spray polyurea series.
Lokacin magani samfurin
| Substrate zafin jiki | bushewa | Tafiyar ƙafa | M bushewa |
| +10 ℃ | 20s | 45 min | 7d |
| +20 ℃ | 15s | 15 min | 6d |
| + 30 ℃ | 12s | 5 min | 5d |
Lura: lokacin warkewa ya bambanta da yanayin yanayi musamman yanayin zafi da ɗanɗano zafi.
Rayuwar rayuwa
*Daga ranar masana'anta kuma akan ainihin fakitin da aka hatimce:
A: 10 watanni
B: wata 10
* zazzabin ajiya: +5-35°C
Shiryawa: Part A 210kg/Drum, part B 200kg/Drum
Tabbatar an rufe kunshin samfurin da kyau
* Ajiye a wuri mai sanyi da iska, guje wa fallasa hasken rana kai tsaye.
